Product Introduction Baghouses (also called pulse jet baghouse, pulsejet dust collectors, etc...) are self contained, fully automated where needed. We also supply and install ducting, access platforms, ventilation and instrumentation. Baghouses are engineered for dusts of 3 microns and larger, in the following applications: We offer a full range of collector designs and media choices to solve the toughest pollution control problems involving high temperatures, pressures and corrosives. Capacities to 200,000+ CFM. All-welded fabrication for operation to ±20" WG (rectangular models); 11 gauge, 12 vertical wire cages are standard. Top and side bag models are available. Feature: 1. It has modern design, it uses lower gas inlet structure, the rough high temperature granules directly drop to the dust hopper and effectively protects the filter bag. 2. It uses long filter bags and it has smaller floor area in case of equal processing capacity, therefore it is more convenient for reconstruction of old factories. 3. It uses separate chamber offfline dust clearingwith high efficiency and few secondary flour dust attachment, in the meantime, it can effectively reduce the equipment energy consumption, the fatigue level of filter bag and pulse valve is correspondingly reduced and the service life of filter bag and vane is prolonged by several times and equipement operation cost is remarkably reduced. 4. The overhaul and bag replacement can be carried out for separate chambersunder the condition that system blower and system run normally. 5. The filter bag inlet used spring tension structure, it is convenient to disassemble & assemble and it has good tightness. 6. The case uses airtightness designand it carries out leak detecting with oil and reduces air leak to the maximum extent. 7. The whole set of equipment is controlled by PLCto realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm.  Model PPC128-6 PPC128-9 PPC128-10 PPC128-2×6 PPC128-2×7 PPC128-2×8 Volume(m³/h) 67300 100900 112100 134600 157000 179400 Air speed(m/min) 1.2-2.0(Speed varies at different dust points) Filtration aream2) 935 1402 1558 1869 2181 2492 Net filtration area(m2) 779 1246 1402 1713 2025 2336 No. of bag(pc) 768 1152 1280 1536 1792 2084 Resistance(Pa) 1470-1770 Minus pressure(Pa) 7000 Dust content at inlet(g/m³) <1300 Dust emission(g/m³) ≤0.1 Compressed air Pressure(Pa) (5-7)×105  Air consumption 3.6 5.4 6 7 8.3 9.5  (m³/min) Pulse valve Qty(pc) 12 18 20 24 28 32 Size 2-1/2″ Elevation valve Qty(pc) 6 9 10 12 14 16 Size(mm) Valve Φ725,air tank Φ100 Discharge device YJD-26 Outlet 300×300mm Capacity 24m³/h Double flap valve 305×915 Screw conveyor Model Dia. Φ300,capacity 21m³/h N/A Gearbox XWD2.2-5-1/43,power 2.2Kw N/A Air slide Air slide 250mm,flow rate 2.0m³/m2, Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered. Bag size and material Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450g/m2,temperature 120°C Insulation area(m2) 125 196 205 223 247 262 Total weight(approx.)(Kg) 24120 31680 34680 43920 52680 60000 Note 1: Net filtration area means the area of one chamber during dust removing.      2: The compressed air consumption is based on supply of compressed air pipe from an air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor.  Model PPC128-2×9 PPC128-2×10 PPC128-2×11 PPC128-2×12 PPC128-2×13 PPC128-2×14 Volume(m³/h) 201900 224300 247600 269100 291600 314000 Air speed(m/min) 1.2-2.0(Speed varies at different dust points) Filtration area(m2) 2084 3115 3427 3738 4050 4361 Net filtration area(m2) 2648 2959 3271 3582 3894 4205 No. of bag(pc) 2304 2560 2816 3072 3328 3584 Resistance(Pa) 1470-1770 Minus pressure(Pa) 7000 Dust content at inlet(g/m³) <1300 Dust emission(g/m³) ≤0.1 Compressed air Pressure(Pa) (5-7)×105  Air consumption 10.7 12 13.1 14.3 15.5 16.7  (m³/min) Pulse valve Qty(pc) 36 40 44 48 52 56 Size 2-1/2″ Elevation valve Qty(pc) 18 20 22 24 26 28 Size(mm) Valve Φ725,air tank Φ100 Discharge device YJD-26 Outlet300×300mm,Capacity 24m³/h Double flap valve 305×915 Screw conveyor Model Dia. Φ300,capacity 21m³/h N/A Gearbox XWD2.2-5-1/43,power 2.2Kw N/A Air slide Air slide 250mm,flow rate 2.0m³/m2, Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered. Bag size and material Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450gm2,temperature 120°C Insulation area( m2) 277 292 307 322 337 352 Total weight(approx.)(Kg) 66480 72000 78480 86400 93600 100800 Note 1: Net filtration area means the area of one chamber during dust removing.          2: The compressed air consumption is based on supply of compressed air pipe from a air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor. We can arrange the shipping to your door.  1.what kind of workpiece will you clean ?  2.The workpiece size,length ,width and height of maximum workpiece?  3.How many workpiecs do you want to clean per day ?  Based on this question,the detailed technical proposals will be sent to you for reference.  Product Introduction Baghouses (also called pulse jet baghouse, pulsejet dust collectors, etc...) are self contained, fully automated where needed. We also supply and install ducting, access platforms, ventilation and instrumentation. Baghouses are engineered for dusts of 3 microns and larger, in the following applications: We offer a full range of collector designs and media choices to solve the toughest pollution control problems involving high temperatures, pressures and corrosives. Capacities to 200,000+ CFM. All-welded fabrication for operation to ±20" WG (rectangular models); 11 gauge, 12 vertical wire cages are standard. Top and side bag models are available. Feature: 1. It has modern design, it uses lower gas inlet structure, the rough high temperature granules directly drop to the dust hopper and effectively protects the filter bag. 2. It uses long filter bags and it has smaller floor area in case of equal processing capacity, therefore it is more convenient for reconstruction of old factories. 3. It uses separate chamber offfline dust clearingwith high efficiency and few secondary flour dust attachment, in the meantime, it can effectively reduce the equipment energy consumption, the fatigue level of filter bag and pulse valve is correspondingly reduced and the service life of filter bag and vane is prolonged by several times and equipement operation cost is remarkably reduced. 4. The overhaul and bag replacement can be carried out for separate chambersunder the condition that system blower and system run normally. 5. The filter bag inlet used spring tension structure, it is convenient to disassemble & assemble and it has good tightness. 6. The case uses airtightness designand it carries out leak detecting with oil and reduces air leak to the maximum extent. 7. The whole set of equipment is controlled by PLCto realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm.  Model PPC128-6 PPC128-9 PPC128-10 PPC128-2×6 PPC128-2×7 PPC128-2×8 Volume(m³/h) 67300 100900 112100 134600 157000 179400 Air speed(m/min) 1.2-2.0(Speed varies at different dust points) Filtration aream2) 935 1402 1558 1869 2181 2492 Net filtration area(m2) 779 1246 1402 1713 2025 2336 No. of bag(pc) 768 1152 1280 1536 1792 2084 Resistance(Pa) 1470-1770 Minus pressure(Pa) 7000 Dust content at inlet(g/m³) <1300 Dust emission(g/m³) ≤0.1 Compressed air Pressure(Pa) (5-7)×105  Air consumption 3.6 5.4 6 7 8.3 9.5  (m³/min) Pulse valve Qty(pc) 12 18 20 24 28 32 Size 2-1/2″ Elevation valve Qty(pc) 6 9 10 12 14 16 Size(mm) Valve Φ725,air tank Φ100 Discharge device YJD-26 Outlet 300×300mm Capacity 24m³/h Double flap valve 305×915 Screw conveyor Model Dia. Φ300,capacity 21m³/h N/A Gearbox XWD2.2-5-1/43,power 2.2Kw N/A Air slide Air slide 250mm,flow rate 2.0m³/m2, Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered. Bag size and material Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450g/m2,temperature 120°C Insulation area(m2) 125 196 205 223 247 262 Total weight(approx.)(Kg) 24120 31680 34680 43920 52680 60000 Note 1: Net filtration area means the area of one chamber during dust removing.      2: The compressed air consumption is based on supply of compressed air pipe from an air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor.  Model PPC128-2×9 The Welding Neck Flange refers to a kind of flange with cone neck and butt welding with cylinder or pipe. It is an integral flange, suitable for high pressure, high temperature or high sealing requirements. Welding Neck Flange Carbon Steel Welding Neck Flange,Carbon Wn Flange,Raised Face Weld Neck Flange,Long Weld Neck Flange Jinan Xintai Forging Co., Ltd , https://www.xtdzflange.com
Dust Collector's parameter:
Â
Â
Â
Â
Company information:
Henan Zhengzhou Mining Machinery Co., Ltd. was founded in 1956 and it is the designated manufacture plant of National Mechanical & Electrical Industry Bureau in Henan Province for cement building materials and beneficiation equipments. After more than half a century of development, Henan Zhengzhou Mining Machinery Co., Ltd has developed to an area of 70000 square meters, plant construction area of 40000 square meters with six modern workshops, two heavy machinery workshops, one Municipal Technology Center and more than 260 sets of machining, assembling, welding and other equipments. Its fixed asset value has exceeded 100 million RMB. Henan Zhengzhou Mining Machinery Co., Ltd has become an integrated modern enterprise with scientific research, design, development, manufacturing, sales, installation, commissioning and training services.The main products of company include: ball mill, rotary kiln, vertical preheater, cooler, crusher, metallurgical coke oven, magnetic separator, flotation machine, classifier, feeder, bucket elevator, preheater, dust collector, elevator, drier, and other equipments relate to metallurgy, cement, lime, mineral processing, refractory, chemical industry. The products of Henan Zhengzhou Mining Machinery Co., Ltd have been sold to every province of China and exported to Russia, Korea, Vietnam, Malaysia, Nepal, Bangladesh, Mexico, Armenia, Africa, South America and other countries and regions. 
Packaging Detail :
The main machinery is in nude packing and spare parts in Wooden or steel box standard export packing, suitable for long distance delivery.
 
FAQ:
According to your requirements,the most suitable machines will be designed for your workpieces please indicate the following details.
Â
Dust Collector's parameter:
Â
Â
Model NO.: Various Model
Application: Cement\ Magnesium\ Limestone\ Dressing\ Ceramsite
Certificate: ISO9001,ISO14000
Capacity: Can Be Customized
Model Selected: We Can Offer
Advantage: Professional Manufacture
Experience: More Than 50 Years
Factory Area: 55000m2
Installation: Under Our Engineer′s Guide
After Sale Service: for The Whole Using Life
Trademark: ZK
Transport Package: Standard Export Packing
Specification: ISO9001, ISO14000, CE
Origin: Zhengzhou, China
HS Code: 8417
Model NO.: Various Model
Application: Cement\ Magnesium\ Limestone\ Dressing\ Ceramsite
Certificate: ISO9001,ISO14000
Capacity: Can Be Customized
Model Selected: We Can Offer
Advantage: Professional Manufacture
Experience: More Than 50 Years
Factory Area: 55000m2
Installation: Under Our Engineer′s Guide
After Sale Service: for The Whole Using Life
Trademark: ZK
Transport Package: Standard Export Packing
Specification: ISO9001, ISO14000, CE
Origin: Zhengzhou, China
HS Code: 8417
High Quality Industrial Dust Collector
High Quality Industrial Dust Collector