Heavy truck is generally double rear axle,if the drive separately that needs to be in the transmission output to two shafts or to add a transfer,cumbersome.To solve this problem,a shaft is now designed in the middle axle to drive both rear axle at the same time. Through Shaft Seal,Through Shaft,A0E Through Shaft,Through Shaft Servo Jilin Province Xuan Yi Trading Co.,Ltd. , https://www.xytruckpart.com
Let's talk briefly about how to safely operate the CNC wire cutting machine:
1. Before starting the machine, check whether the electrical components are loose. In case of broken wires and parts falling off, the maintenance personnel should be promptly notified.
2. Check the tension of molybdenum wire.
3. Check whether the guide wheel is damaged and exchange the position of the working surface in time. If there is a communication slot in the wire rod, the position of the working surface should be adjusted in time to prevent the wire from breaking.
4 Check that there is enough lubricant in the lubrication area of ​​the machine tool.
5. Turn on the machine's main power supply, controller switch, 24V step-drive power switch and high-pulse power switch.
6, according to the size of the drawings and the actual situation of the workpiece coordinates calculation program, pay attention to the workpiece clamping method and molybdenum wire diameter, choose a reasonable cutting position.
7. Turn on the high frequency switch on the track motor, pump motor and control panel.
8. Place the coarse adjustment switch in the automatic position and pull out the feed switch, that is, enter the processing stage. During processing, further fine adjustment of the fine adjustment switch and fine adjustment of the software is performed so that it is adjusted to the most stable state of processing.
9, after the end of processing should be the first order to turn off the machine's high-frequency pulse switch, water pump switch, close the thick closed storage tube switch, if you want to bring the brake off single press the total power switch red button.
The operation of the machine tool is a piece of technical work, so with many dangers, correct and safe operation of the machine tool can not only improve the service life of the machine tool, the processing efficiency of the workpiece, but also a kind of guarantee for its own safety.