Model NO.: SH-DF
Brand: Suhang
Package: Film Plastic and Steel Wire
Control System: PLC Control System
Type: Concrete Iron Strengthen Machinery
Trademark: Suhang
Transport Package: Film and Steel
Specification: CE. SGS. ISO9001: 2008
Origin: Wuxi, Jiangsu
HS Code: 8455229090
Metal Floor Deck Panel Cold Roll Forming Machine

Metal Floor Deck Panel Cold Roll Forming Machine
Specifications:
1. High wave, high strongness, high atuomation
2. Passed by CE and ISO9001
3. Adopt PLC system

Features:
1. The panel produced by this machine has high strength with big wave. It adheres well to concrete. It is used on high buildings. It not only saves steel mold plate, but also saves investment.

2. The deck floor panels forming by this machine is used for high building surface panels, it has so many good advantages, such as high wave, high strongness, high atuomation, low cost.

Main technical parameters:
1. Steel Thickness mm 0.8-1.2
2. Steel feeding width mm 1000-1250
3. Forming Speed m/min 10-15
4. Roller stands stand 30-36
5. Roller Material 45# steel, coated with chrome
6. Hydraulic cutting Power Kw 18
7. Hydraulic pressure Kw 5
8. Hydraulic pressure Mpa 12
9. Power Supply 380V, 50HZ, 3 phase
10. Tolerance mm 1.5
11. Material of cutting Cr12
12. Control system PLC with touch screen
13. Machine net weight T 16

Machine Components:
Unpowered Decoiler, Main forming machine, Forming cutter, Computer control system, Hydraulic station, Product Rack

Working Flow
Decoiling guiding and feeding roll forming cut to length run out table
Item NO  Description Unit\Type RF-DP
1 Steel Thickness mm 0.75-1.2mm
2 Forming Speed m/min 0-12
3 Raw material weight mm 1000
4 Roller stands stand 36
5 Roller Material   45# steel
6 Shaft diameter and materail    45# steel with quenching HB240°
7 Main Motor Power Kw 15Kw*2
8 Hydraulic cutting Power Kw 5.5
9 Hydraulic pressure Mpa 12
10 Power Supply   380V, 50HZ,3 phase
11 Tolerance mm 1.5
12 Material of cutting   Cr12
13 Control system   PLC with touch screen

Gold Centrifugal Concentrator

The main indicators of this series of equipment basically reach the level of similar international products (such as Nielsen gold selectors, etc.). Compared with similar equipment at home and abroad, this series of equipment has the advantages of high cost performance, easy operation, and low maintenance costs.

The actual use of mining enterprises has proved that the recovery rate of placer gold is above 95%, especially when the single gold in vein gold mines is recovered, when the grinding particle size is less than 0.074mm accounting for 65%, the recovery rate of single gold can reach 98% Above, the recovery rate of 0.04mm monomer gold is over 97%. The discharge cycle is 1 to 4 hours, and the enrichment ratio can reach 1000 times.


Gold Centrifugal Concentrator,Centrifugal Concentrator,Centrifugal Gold Separator,Centrifugal Concentrator Gold Recovery

Changchun Gold Research Institute Co.LTD , https://www.changchungoldresearch.com

Posted on