Boiling dryers have a wide range of applications and provide a good drying effect on materials that change during drying. The improved process for efficient feed-specific boiling dryers introduced by Changzhou Unification Drying has introduced advanced technology on the basis of the original ones. After the air has been heated and purified, it is introduced by the induced draft fan from the lower part and passes through the hole mesh plate of the hopper. In the working chamber, fluidization is formed by stirring and negative pressure. After the moisture evaporates quickly, the material is quickly dried as the exhaust gas is carried away.
The turn-out scrap Metal Baler machine is used to compress scrap metal (steel, copper, aluminum, stainless steel, etc)into metal block or metal bale. The purpose is to save the transportation cost or reduce the raw material loss when smelting.
After compressing, the metal bale is easy to transport and store, so it can save transporation cost, reduce storage area and reduce the loss when smelting. Easy operation, durable and long service life, high efficiency, etc.
1) Hydraulic drive, compact design, great sealing;
2) Customized press box size and bale size;
3) Bale discharging ways include turn-out, side-push out and forward-out;
4) Designed with quick unit that can improve work efficiency substantially;
5) Famous motor, hydraulic system, oil cylinder, piston pump, electrical components;
6) Blades: our scrap metal baler machine with the knife, it can cut the long size material when compressing, so it very goog for the long steel wire and big size material.
Turn-out Baler, Turn-out Baling Machine, Turn-out Baling Press, Turn-out Baler Equipment, Turn-out Metal Compactor Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyeya.com
Boiling dryer performance characteristics Fluidized bed circular structure to avoid dead ends. The hopper is set to agitate to prevent the formation of furrows when wet materials are agglomerated and dried. The use of tipping and unloading is convenient, rapid and thorough, and the automatic feeding and discharging system can also be designed according to requirements. Sealed negative pressure operation, air flow filtered. Easy to operate, easy to clean. Drying speed, temperature uniformity, each batch of drying time is generally 20-30 minutes, depending on the material.
The Boiling Dryer is adapted to the material mechanism screw extrusion particles, rocker particles, and wet-process high-speed mixing granulation particles. Wet particles and powdered materials are dried in the fields of medicine, food, feed and chemical industry. Large particles, small pieces, viscous blocks of granular material. Konjac and other materials that change in volume when dried. 