Model NO.: 1700x4000mm
Condition: New
Automatic Control: High Efficiency
Automatic Giving an Alarm: Long Service Life
Weight: 5t-50t: Weight: 5t-50t
Voltage: 220V/380V/440V/460V: Voltage: 220V/380V/440V/460V
Temperature: 150-220 Degree: Temperature: 150-220 Degree
Design Pressure: 0.6-3.0MPa: Design Pressure: 0.6-3.0MPa
Length: Any Length
Diameter: 600-4500mm
Operation Way: Automatic
Colour: as Customers′ Requirements
Trademark: Guangyue / OEM
Transport Package: in Bulk
Specification: 1700x4000mm
Origin: China
HS Code: 8477800000
Rubber vulcanisation autoclave are divided into two series: steam vulcanizing boiler series and hot air vulcanizing boiler series. Each series has three heating mediums: steam, electric and conduction oil.
 
 
type:horizontal ,vertical 
 
heating ways:steam heat ,thermal oil heating ,elecricity heating ,electric heating air 
 
temperature :150-220 degree
 
pressure:0.6-3.0Mpa
 
operation ways:automatic
 
diameter:600-4500mm 
 
length: any length is ok
 
safety device:automatic discharge pressure ,automatic feed water ,automatic alarm, the door has double safty interlock device


Electric steam heating vulcanizing tank:

1.uniform temperature 
2.convenient operation 
3.reasonable structure
electric heating vulcanizing tank
 
 
Main usage
1. Pillar type plate vulcanizer is used for pressing all kinds of rubber model products, rubber plate,    thermosetting plastic, and so on.
2. The cutting press also can be used as common hydraulic machine.
 
Advantages
1.Structured of pillar type bottom cylinder curing.
2.Hydraulic drive ,electric relay control
3.The curing time and pressure can be adjusted.H
4.Economical advantage of compact structure, high working pressure, high producing efficiency.
5.Safe and reliable operation.
6.Hand and electric control as customer's request.
7.PLC control and high automation, which can automatically identify faulty instruction, avoiding accidents caused by faulty operation.
8.CE standards
 
Technical parameter   
Item 800 1200 1500 1700 2000 2600
Inner diameter(mm) 800 1200 1500 1700 2000 2600
Canister length(mm) 22000 3000 3000 4000 5000 10000
Number of lid sawtooth 12 12 14 14 16 24
thickness of lid (mm) 10 10 10 10 16 14
Thickness of the tank body(mm) 10 10 10 10 12 14
Working pressure(Mpa) 0.8 0.8 0.8 0.8 0.8 0.55
Dimensions(mm)
(length*width*height)		 22766*1445
*1170		 4010*1575
*1670		 3960*2150
*2050		 4925*2162
*2070		 6200*2590
*2424		 11722*3360
*4136
Weight(Kg) 5580 2017 2950 3835 6500 16775


 
 

Extrustion Blow Molding Machine

Blow moulding machines can be divided into three categories: extrusion blow moulding machines, injection blow moulding machines and special structure blow moulding machines. Stretch blow molding machines can be classified into each of the above categories. Extrusion Blow Molding Machine is the combination of extruder, blow molding machine and die closing mechanism, which is composed of extruder and blank die head, blow expansion device, die closing mechanism, blank thickness control system and transmission mechanism. The blank die is one of the important components that determine the quality of blow molding products, usually including the side feed die and the center feed die. The storage cylinder type blank die head is often used for large products during blow molding. The minimum volume of the storage tank is 1kg and the maximum volume is 240kg. The parison thickness control device is used to control the parison wall thickness. The maximum control point is 128 points, generally 20~30 points. The extrusion blow molding machine can produce hollow products with a volume range of 2.5ml~104l.

Injection blow molding machine is the combination of Injection Molding Machine and blow molding mechanism, including plasticizing mechanism, hydraulic system, control electrical apparatus and other mechanical components. Common types include three-station injection blow molding machine and four-station injection blow molding machine. The three-station machine has three stations for preforming, blowing and demoulding, each of which is separated by 120 °. The four-station machine has more pre-forming stations, each of which is separated by 90 °. In addition, there is a dual-station injection blow molding machine with 180 ° between stations. The plastic containers produced by the injection blow molding machine are accurate in size and do not need secondary processing, but the mold cost is high.

The special structure blow molding machine is a blow molding machine that uses sheet, molten material and cold blank as parison to blow mold hollow body with special shape and purpose. Due to the different shapes and requirements of the products produced, the structure of the blow molding machine is also different.

Extrustion Blow Molding Machine,Pe Extrustion Blow Molding Machine,Pet Stretch Blow Moulding Machine,Injection Stretch Blow Molding Machine

Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com

Posted on