Before the truck is out of the vehicle, it is necessary for the driver to carry out maintenance and repairs on the vehicle. Attention should be paid to whether various on-board instruments are normal and effective, and prevent the vehicles from being “sick” on the road. Check “Five oils, four pressures, and three waters” before the sprinkler travels . "Five oils" are oil, transmission oil, power steering oil, brake oil, and gasoline: "Four pressure" is: oil pressure, voltage, tire pressure, air pressure: "Sanshui" is: tank water, battery water, wiper water.
When an engineering vehicle such as a high-altitude sprinkler goes on the road, safety reflective signs must be posted at obvious locations on the vehicle body to open dangerous warning lights to warn passing pedestrians and motor vehicles to pay attention to traffic safety. Motor vehicles encounter engineering work vehicles on the road. When you work, you must also slow down, keep your car safe and secure.
When a sprinkler vehicle is difficult to move on the road, the hazard warning flash light should be continuously turned on first, and then a warning sign should be set 150 meters away from the direction of the faulty vehicle. At the same time, the on-board personnel should quickly transfer to the right shoulder or emergency lane. And quickly alarm.
  Sprinkler as a special car for cooling and dusting, when driving out in hot weather, the driver needs to pay attention to: 1. Pay attention to rest, maintain energy, avoid fatigue driving. 2. The sun is dazzling, pedestrians have an umbrella, and the driving needs to be especially small. 3. Never wear slippers or high-heeled shoes. 4. Don't place gas lighters in the car. High temperature can cause deflagration. 5. Do not open the air conditioner for a long time. 6. Do not wear sunglasses with dark colors. 7. Beware of spontaneous combustion of the vehicle. .
Hubei Xigong Chusheng sprinkler manufacturers reminded the majority of sprinkler drivers: Be sure to maintain a good condition before you leave the train. Don't fatigue your driving for the safety of you and others.

Hydraulic Punching

Hydraulic punches are designed to perforate metal with round, square or oblong holes. They are designed to work on mild steel, non-ferrous metals and some plastics (non-shattering). Hydraulic punches may be powered by hand pumps, air/ hydraulic, gas, or electric driven pumps which develop up to 10,000 psi (700 bar).

Hydraulic Punching Machine,Hydraulic Hole Punch Machine,Hydraulic Punching Machine Price,Hydraulic Hole Punch Press

Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hosdunmachinetools.com

Posted on