Metal Body Square Water Cooling Tower This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results. Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com
Specification of oxy-hydrogen flame enameled wires welding machine/oxy-hydrogen welding machine:
1. Energy-saving. Oil saving 20%, energy saving 40%. Consume water and electricity, electrolyze water into hydrogen gas and oxygen gas. Use H2 and O2 as source of flame replacing LPG, Propane, Acetylene fuel or natural gas or other fuel.
2. Environment-friendly. Consumption of water, it produces water. Compared with traditional fuel, and are more beneficial to the environment and human.
3.100% safe. Because the density of hydrogen is small, it will not be assembled on the ground, so there is no risk of explosion.
4. Save time & money. The temperature of the oxy-hydrogen flame is up to 2800 degrees Celsius, and the flame is more concentrated. Compared with conventional fuel, more save time and cost.
5. CE, SGS Certification
Multi-functions application of oxy-hydrogen flame enameled wires welding machine/oxy-hydrogen welding machine:
1. Jewelry welding
2. Acrylic polishing(15mm)
3. Platinum resistor welding
4. Varnished wire welding
5. Waxy film repair
6. Thermocouple welding
Quartz glass tube sealing, water injection wire drawing sealing
7. Small copper pipe welding, etc.
Unique Patented &Systems features of water welding machine/HHO generator for welding/HHO welding machine:
1. Power Supply IGBT frequency conversion technology, conversion efficiency is as high as above 90%, stable and reliable to exchange AC turn to DC.
2. Electrolysis cell Integration formed electrolysis cell, no any gas and liquid leakage.
3. Electrolytic process, Dynamic self-circulation electrolytic process, purifier is installed in electrolyte circulation pipeline, it can clean the electrolysis cell automatically.
4. Electrolysis polar plate, Special activity alloy material surface treatment, low over potential and no leakage between the polar plates, the gas production efficiency is high.
5. Moisture separation system Centrifugal compulsive moisture separation device, can achieve Moisture separation 100%, and always keep blue flame.
6. Pipeline system seamless stainless steel tube, no any rubber hoses absolutely, no gas or liquid leakage, ensures the safety and reliability
7. Anti-backfire system Adopt patented wet-type anti-backfire and dry-type flashback arrestor and automatic safety valve device, build in automatically decompression and recover device, prevent from backfire, no need reset by manual.
8. Heat dissipation system Unique duct design and larger space for heat dissipation to meet the needs of the work for 24 hours under high temperature of 40 degrees in summer.Â
9.Technical Data Sheet
Model
Kingkar-60
Kingkar-100
Kingkar-200
Kingkar-300
Kingkar-400
Kingkar-600
AC Voltage Requirement (V)
220/110Â Â
Phase
single
DC VoltageÂ
24V
5V 60A
5V 60A
5V 60A
5V 60A
5V 60A
Max Gas Output
60L/h
100L/h
200L/h
300L/h
400L/h
650L/h
Max. Working Pressure (kg/cm2)
1.3
Max. Water Consumption (L/h)
0.06
0.06
0.11
0.17
0.23
0.33
Water Feed
manual
Max. Flame Modifier Consumption (L/h)
0.05
0.05
0.1
0.15
0.17
0.23
Flame Modifier Feed
manual
Dimensions - L*W*H (mm)
465*280*480mm
435*308*540mm
485*300*540mm
640*245*550mm
730*300*540
1050*300*540
Gross Weight (kg)
9
15
20
25
32
40
Ventilation Space Requirement (mm)
200 in each direction Â
Thank you for visiting. Any questions, please feel free to contact us. I am Huang Renhua here.Â
Specification of oxy-hydrogen flame enameled wires welding machine/oxy-hydrogen welding machine:
1. Energy-saving. Oil saving 20%, energy saving 40%. Consume water and electricity, electrolyze water into hydrogen gas and oxygen gas. Use H2 and O2 as source of flame replacing LPG, Propane, Acetylene fuel or natural gas or other fuel.
2. Environment-friendly. Consumption of water, it produces water. Compared with traditional fuel, and are more beneficial to the environment and human.
3.100% safe. Because the density of hydrogen is small, it will not be assembled on the ground, so there is no risk of explosion.
4. Save time & money. The temperature of the oxy-hydrogen flame is up to 2800 degrees Celsius, and the flame is more concentrated. Compared with conventional fuel, more save time and cost.
5. CE, SGS Certification
Multi-functions application of oxy-hydrogen flame enameled wires welding machine/oxy-hydrogen welding machine:
1. Jewelry welding
2. Acrylic polishing(15mm)
3. Platinum resistor welding
4. Varnished wire welding
5. Waxy film repair
6. Thermocouple welding
Quartz glass tube sealing, water injection wire drawing sealing
7. Small copper pipe welding, etc.
Unique Patented &Systems features of water welding machine/HHO generator for welding/HHO welding machine:
1. Power Supply IGBT frequency conversion technology, conversion efficiency is as high as above 90%, stable and reliable to exchange AC turn to DC.
2. Electrolysis cell Integration formed electrolysis cell, no any gas and liquid leakage.
3. Electrolytic process, Dynamic self-circulation electrolytic process, purifier is installed in electrolyte circulation pipeline, it can clean the electrolysis cell automatically.
4. Electrolysis polar plate, Special activity alloy material surface treatment, low over potential and no leakage between the polar plates, the gas production efficiency is high.
5. Moisture separation system Centrifugal compulsive moisture separation device, can achieve Moisture separation 100%, and always keep blue flame.
6. Pipeline system seamless stainless steel tube, no any rubber hoses absolutely, no gas or liquid leakage, ensures the safety and reliability
7. Anti-backfire system Adopt patented wet-type anti-backfire and dry-type flashback arrestor and automatic safety valve device, build in automatically decompression and recover device, prevent from backfire, no need reset by manual.
8. Heat dissipation system Unique duct design and larger space for heat dissipation to meet the needs of the work for 24 hours under high temperature of 40 degrees in summer.Â
9.Technical Data Sheet
Model
Kingkar-60
Kingkar-100
Kingkar-200
Kingkar-300
Kingkar-400
Kingkar-600
AC Voltage Requirement (V)
220/110Â Â
Phase
single
DC VoltageÂ
24V
5V 60A
5V 60A
5V 60A
5V 60A
5V 60A
Max Gas Output
60L/h
100L/h
200L/h
300L/h
400L/h
650L/h
Max. Working Pressure (kg/cm2)
1.3
Max. Water Consumption (L/h)
0.06
0.06
0.11
0.17
0.23
0.33
Water Feed
manual
Max. Flame Modifier Consumption (L/h)
0.05
0.05
0.1
0.15
0.17
0.23
Flame Modifier Feed
manual
Dimensions - L*W*H (mm)
465*280*480mm
435*308*540mm
485*300*540mm
640*245*550mm
730*300*540
1050*300*540
Gross Weight (kg)
9
15
20
25
32
40
Ventilation Space Requirement (mm)
200 in each direction Â
Thank you for visiting. Any questions, please feel free to contact us. I am Huang Renhua here.Â
The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.
The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.
The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.
Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.
When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.
The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).
The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.
When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.
Model NO.: Kingkar400
Phase: Single
Max. Working Pressure (Kg/Cm2): 1.3
Water Feed: Manual
Flame Modifier Feed: Manual
Ventilation Space Requirement (Mm): 200 in Each Direction
OEM: Available
ODM: 1 PCS
Trademark: Kingkar
Specification: CE ISO9001
Origin: Hunan. China
Model NO.: Kingkar400
Phase: Single
Max. Working Pressure (Kg/Cm2): 1.3
Water Feed: Manual
Flame Modifier Feed: Manual
Ventilation Space Requirement (Mm): 200 in Each Direction
OEM: Available
ODM: 1 PCS
Trademark: Kingkar
Specification: CE ISO9001
Origin: Hunan. China