The vortex flowmeter can only measure one-way. When installing, pay attention to ensure that the direction of the medium flow is consistent with the direction indicated by the arrow of the flowmeter. 2. The vortex flowmeter 1 is installed vertically. The medium passes through the flow meter from bottom to top. The flowmeter is installed on a vertical pipe with the flow direction from bottom to top. 3. When installing horizontally, the flowmeter must be installed in the high pressure area of ​​the entire system and ensure the corresponding outlet pressure;
With the rapid development of construction industry , the concrete waste is also increasing rapidly every year. The normal way to deal with the waste is to deliver them to the landfill or pile up, that is a huge waste of resource and also the pollutants for the environment. Of course it is contrary to the spirit of building a resource conserving and environment-friendly society. Concrete Reclaiming adopts the advanced PLC system and realizes the automatic operation of separating and recovery.
Applications:
It is applicable to river, reservoir, coal yard and Concrete Batching Plant.
It is mainly used for the cleaning of mixing truck, and the separation, collection, reuse of the waste.
It can solve the pollution problem effectively and can save the precious architectural materials.
PLC electronic control box adopts the European advanced technology,so this product achieves automatic control on the whole process.
The sandstone can be separated completely at one time
The washing water can be recycled , so there is no discharge of the sewage.
The sieve is convenient to assemble and not easy to be rusty and blocked.
Shell steel is thick to 8-10mm which is not easy to rust corrosion even in the open air.
Concrete Reclaiming,Reclaimer System Machine,Concrete Reclaimer Systems,Concrete Batching Mixing Plants Zhengzhou XinFeng machinery manufacturing Co. Ltd , https://www.xfmachinery.com
Do not install at the highest point of the pipeline, because the highest point is often gas accumulation, the pipeline is not full, the export can not be directly vented. 4. When measuring high temperature fluids, try to use vertical installation; if you have to install horizontally, please install the transmitter part of the flowmeter vertically or horizontally to avoid excessive temperature; pay attention to the air flow at the installation position Or well-ventilated. 5. Straight section requirements: at least 15 times the diameter of the flowmeter, and 5 times the diameter of the flowmeter. If the flowmeter is preceded by an interference source such as an elbow, indentation, or expansion, the diameter of the flowmeter must be 30-40 times the diameter of the flowmeter and 6 times the diameter of the flowmeter. The flowmeter should be installed upstream of the regulator valve, pressure or temperature sensor. 6. When installing, pay attention to the pipe diameter should be slightly greater than or equal to the inner diameter of the instrument. 7. When using the seal ring, pay attention to the inner diameter of the seal ring should be slightly greater than or equal to the inner diameter of the instrument, the center of the seal ring is located in the pipeline