On-site repair of slurry pump casing wear step 1. Disassemble the pump body and have repair conditions; 2. Flush the repaired volute with steam and a clean water source to remove residual media; 3. Roughing the repaired parts with sandblasting or electric tools to expose the original metallic color; 4. Use a clean compressed air to remove surface dust; 5. Brush the SD3000 primer material in the repaired area; 6. Proportionately blending Sole carbon nanopolymer materials; 7. Apply the Sole SD7400 material to the repaired area to a smooth surface; 8. Install the rotor impeller after the material is solidified; 9. Put into operation. Rotary drum flaker is a kind of rotating continuous drying equipment with internal heating conducting function. The material film will stick to the bottom of the rotating cylinder. The heat is transferred to the internal wall of the cylinder through piping system and it will be conducted to the external wall and material film. The moisture of the wet material film will be easily evaporated and the dried material will be scraped from the cylinder surface and transfer to the packing area by the screw conveyor. Drum Flaker,Rotary Drum Flaker,Drum Dryer Flaker,Rotary Drum Scraper Dryer Changzhou Lead Machinery Technology Co.,Ltd , https://www.leaddryer.com