Model NO.: TYA-50
Condition: Brand New
Output Oil: New Oil
Trademark: Zhongneng
Transport Package: Wooden Case
Specification: ISO, CE
Origin: Chongqing, China
HS Code: 8421299090
Model NO.: TYA-50
Condition: Brand New
Output Oil: New Oil
Trademark: Zhongneng
Transport Package: Wooden Case
Specification: ISO, CE
Origin: Chongqing, China
HS Code: 8421299090
 Flow Rate 50L/Minute Waste Engine Oil Cleaner, Used Engine Oil Recycler, Engine Oil Recycling


Company Profile
Chongqing Zhongneng Oil Purifier Manufacture Co., Ltd is a leading oil purifier manufacturer in China, which engages in developing, producing, selling a series of oil purifier such as transformer oil purifier, turbine oil purifier, engine oil purifier, lube oil purifier and so on. We practice in this line for eight years, so we have a strong technology and gain rich experience. Our products have been exported to many countries, and get a high reputation.
Since the foundation of our company, under the duty of devoting our efforts to develop the advanced purifier for saving energy sources, adopting the advanced management like SUBI, and with the reliance on the strong technical force, advanced equipments of production, perfect quality check method, fast and outstanding after-sales service, our company has developed into a national big base specialized in producing oil purifier. Our products are outstanding because of its excellence in quality, stability in service, and diversity of products.
Chongqing Zhongneng Oil Purifier Manufacture Co., Ltd owns a number of national-class oil purifier experts and experienced engineers. Encouraged by the company's modern management mechanism, we have developed six big series, including hundreds of models oil purifier equipments which have the independent property right and advanced filter technology. Those equipments can be applied to many fields, such as the electric power, petroleum chemical, metallurgical industry, mine, aviation, shipping and railway, and so on. 
We adhere to the tenet of mutual-benefit and both-win. With the sincere and pragmatic work attitude, we would like to open up new Sci&Tech oil purify era with our customer.
Flow Rate 50L/Minute Waste Engine Oil Cleaner, Used Engine Oil Recycler, Engine Oil Recycling

Application and Features
Application
The TYA series can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Regenerating the used hydraulic oil, lubricating oil, coolant oil, machine oil and so on.

Flow Rate 50L/Minute Waste Engine Oil Cleaner, Used Engine Oil Recycler, Engine Oil RecyclingFeatures

  1. With the strong ability to filter the impurity, which can filter the particles completeTYA.
  2. It has the back flush system, which can clear impurities automaticalTYA.
  3. Advanced dielectric condensation device 
  4. This machine installs the new pressure protector, which can control the temperature automaticalTYA; also it can drain water on line by the water-separator device. So it is easy to control this machine.
  5. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermostable, mechanical strength. EspecialTYA, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
6.  The unique degas and dewater system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickTYA by the Multi-level water-oil separation technology.
Flow Rate 50L/Minute Waste Engine Oil Cleaner, Used Engine Oil Recycler, Engine Oil Recycling

Working Principle and Structure
1. Working Principle
When it starts working, the used oil will be poured into the heater to heat under the vacuum pressure, then the heated oil enter into the primary filter which will eliminate the big impurities, then the oil enter into the vacuum separator, the oil will flow the special radiation device, which make the unit/volume oil to produce a large surface area, lets the pollution oil exposure in the low humidity atmosphere, thus the water, air and gas can be eliminated. The treated vapor and gas form the gaseous mixture becomes the liquid through the water tank and the chiller condensation, then the liquid enters water receiver together, the vacuum extracts the surplus gas.
The oil which is drained away water flow into precision strainer where can exhaust particulates (oil purification). According the quantity of the water content, a whole purification needs many times circulation to drain away the water.    
2. Flow Chart 
Technology Indexes (Table 1,Table 2)
         Table 1 Vacuum Oil Purifier Technology Standard
Parameters Unit TYA-10 TYA-20 TYA-30 TYA-50 TYA-100 TYA-150 TYA-200 TYA-300
Flow rate L/min 10 20 30 50 100 150 200 300
Vacuum degree Mpa -0.06 ~- 0.095
Working pressure Mpa ≤0.4
Temperature degree  ºC 0~100
Working noise dB(A) ≤75 ≤75 ≤75 ≤78 ≤78 ≤78 ≤80 ≤82
Electric heating power KW 36 40 45 72 80 90 120 135
Total electric power KW 38 42 47 75 87 101 135 147
Inlet (outlet) caliber mm Ф25 Ф25 Ф25 Ф32 Ф42 Ф50 Ф50 Ф60
Size mm 1500x1000x 1600 1500x1050x 1600 1500x1050x1650 1600x1150x1700 1750x1150x1750 1900x1600x1950 1950x1600x1950 2100x1600x2000
Weight Kg 350 380 400 450 550 650 700 750
Viscosity index mm2/S GB443-89
Flash point(open cup) ºC GB443-89
Moisture % No (GB/T260)
Mechanism impurities % 0.05~0.005(GB/T511)
Table2 TYA Oil Purifier Treated Guarantee Value
Item Guarantee indexes
Moisture ≤80PPM
Demulsification value New oil≤15min,running oil≤30min
Clean degree ≤6 Grade(NAS1638)
Flow Rate 50L/Minute Waste Engine Oil Cleaner, Used Engine Oil Recycler, Engine Oil Recycling
 
Preparation And Check
1 All spare parts of the oil purifier have adjusted before leaving factory. When the product is sent to work point, they must be checked again.
2 Oil purifier is set up stabTYA. The oil inlet is connected with the oil outlet under part of the oil tank. The oil outlet is connected the top of the oil tank.
3 Carry out electrical wiring including grounding of the machine. Check all the wire connections of the power panel, oil pump, vacuum pump and heater to ensure reliable connection and insulation.
4 Conduct a test run of the oil pump-motor to see whether it runs clockwise (viewed from the end of the motor). If not, correct the power line wiring.
5 When dealing with the hydraulic oil and other mechanic oil on-line, pls suppTYA the same brand oil properly to make sure the oil level of the oil tank normally.
Operating Procedures of Control Panel  
  1. For external wiring of the control panel, please refer to the Electrical Diagram. Connect the mains of 318V 3-phase 4-wire AC to the left of the panel and make sure that the panel outer casing is reliably grounded.
  2. Turn on the main switch and the power indicator is lit up, which shows the power is on.
  3. When heating, turn on the temperature controller, and the red light dedicates that being preparation situation. Then turn on the switch of temperature controller set the working temperature to start the heater for oil heating. When the oil temperature reaches the set value, the temperature controller will automatically turn off the heater. Therefore, automatic heating can be conducted with thermostatic effect.
  4. After stopping operation, turn off the main switch and lock the door of the control panel.
Operating Instructions
1.Operating procedures
a) Connect the main power to the machine and link the oil inlet and outlet pipes. According to the flow chart, separateTYA close all valves (1.9.10.13.16.17), which are connected to the outside, open valves2 and 4 (or 3 and 5, separateTYA use two primary strainers or the two ones can be used at the same time), 6, 9 to form an oil-filtering road.
b) Turn on the vacuum pump. When the vacuum degree reach -0.07Mpa, slowTYA turn on oil inlet valve 1in order to make the oil flow into machine.
c) Observe the oil level of the vacuum separator. When the oil level reach the floating ball controls point, open the oil ball valve12, 19.
d) Open oil pump (note: after make sure the oil outlet valve is open, the oil pump can be opened, or there may be danger in bursting of tube.), the oil is exhausted from oil outlet so the oil purifier can filter oil circulatory. Adjust oil inlet valve 1 to make the oil output reach balance basicalTYA, which means there is level controller to automaticalTYA control.
e) When the oil have circulated normalTYA to filter in the oil purifier (the inlet oil quantity is equal with the outlet oil quantity), open heater. Set the temperature between 45-70ºC(according to the requirement), then have the oil heated in constant temperature to guarantee the vacuum separator can degas and dehydrate.   
f) When the oil purifier work normalTYA, open the fan on the cooler in order to have the strong wind cool the system and start work. Make sure the water vapor and gas cooling to deposit in the water receiver of the cooler.
g) After the machine has run for a long time, sampling some oil at the sampling valve to test.
h) If the water content is large and form emulsification state (emulsification oil), open the valve7 and close valve6 make the water diversion device to demulsificate and dehydrate.
i) If the oil is needed to treat deepTYA, add some chemical properTYA to have the treated oil cleaner.
  Method: add some chemical (100g) into feed hopper, and then gradualTYA open up the feed hopper valve21 to absorb the chemical into vacuum separator through vacuum automaticalTYA. After stir automaticalTYA, have the chemical into fine filter to form a compact membrane so that it can filter fine.
2.Stop Machine 
When finish treating oil or need stop suddenTYA, pls as following operate:
  1. First restore the temperature controller, stop heating, after the machine run 3-5 minutes, close the oil inlet valve 1.
  2. Close vacuum pump, stop exhaust vacuum.
  3. Drain away the oil in the vacuum separator through oil pump, then close oil pump.
  4. Open the vent valve on the vacuum separator, release vacuum, respectiveTYA open water receiver valve 10,17 to let out the rest oil or water. Open the precision filter valve 13 to drain away the remind impurities. Note: after finish the operation, remember to close valves so that can be used next time.
  5. SpecialTYA note: if face the emergence situation, press the emergence-stopping button ,then the machine is divided with power. If want to restart the machine, must run clockwise to have the emergence-stopping button restore. So that can open the various control buttons to have the machine work normalTYA.
3.Use Instruction  
  1. The temperature range in working is between -20~45ºC.
  2. The altitude of the work point can affect the vacuum degree of the machine. The altitude is higher, the vacuum degree is lower.
  3. The used oil should not be too dirty (there are many impurities), or else must use other filter device to filter firstTYA (for example: JI series portability purifier) in order to avoid the effect of dehydrates, degas or jam the filter parts.
4.Notices in operation 
  1. When vacuum pump is working, pls note the oil situation of the oil level (the oil is above the oil level). if there are much water in vacuum pump oil or the oil is too dirty, replace instantTYA to avoid influencing the lifetime of vacuum pump.
  2. If there are much water in the cooler when running, pls drain away instantTYA. First close valve15, open valve116,17 so that the water can be drained away from valve.
  3. Pls observe the pressure gauge. When filtering oil, if the pressure>0.3Mpa, clean purifier instantTYA or replace the filter parts.
  4. The filter net of the primary filter should be often clean in order to avoid jamming which cause lack of inlet oil or high pressure. When the capacity of the inlet oil is fewer, it means that the impurities in the filter net are much. Pls clean the net instantTYA.
  5. Note whether the noise of the pump and related electric motor is normal when on-line. If there is abnormal situation, pls resolve the problem right now to avoid burning electric motor and influencing the lifetime of the oil pump.   
n)  If the machine should not be used, pls drain away the oil in vacuum pump and inject new oil.
Maintenance
1.After a certain period of running, the machine should be checked to see whether:
 
a) The electrical control system is safe and reliable;
b) The temperature controller is sensitive, reliable and accurate;
c) Oil seals of the pump shaft are broken with leakage;
d) There is any blockage with the running system and any abnormal noise with pumps or related motors;
e) There is any air or oil leakage with the oil running system and at sealing joints.
 
2.After each 3000 hours' running, grease shall be replenished to prevent motors from being burnt.
 
3.Special vacuum pump oil or lubricating oil N46 should be used fro the vacuum pump and oil replaced or replenished if necessary at any time.
 
4.If the machine will not be used over 1 month, Place the machine in a dry environment with the panel door and all valves closed, and the machine proper protected by a covering.
Trouble Shooting
Trouble Cause Remedy
The quantity of inlet oil is less that of outlet oil when the machine runs stably The primary filter is jammed,the resistance of the secondary filter is increased Unpick and wash the filter,rearrange the process of the secondary purification. 
Abnormal noise with oil pump on start or in running 1.There is air blockage in pump, producing noise.
2.Oil not sufficient or too much air in oil pump. 		1.Adjust openness of inlet valve.
2.Release air form oil inlet pipe.
Heater if on but oil temperature does not rise. 1.Temp. sensor probe is out.
2.Poor contact of heater.
3.Circuit break.
4.Heating tube is burnt. 		1.Fix the probe;
2.Check or replace
3.Repair
4.Replace heater.
Vacuum drops below the rated value 1.There is air leakage stemmed from poor joint or otherwise untightness.
2. Insufficient oil in vacuum pump
3. Dirty oil in vacuum pump
4. Air release valve or other part of vacuum pump is broken.
5. Vacuum meter does not work. 		1.Repair
2.Replenish oil to mark line
3.Replace oil.
4.Repair
5.Replace
It is difficult to start vacuum pump 1. There is foreign matter in pump
2. Belt is too loose or tight or coupling goes wrong.
3. Poor power line wiring or motor goes wrong. 		1.Check ,esp. whether there is any piece of broken copper gauze of air inlet in pump.
Sup Board

WEIHAI SUNSHINE YACHTS CO.,LTD , https://www.ssboats.cn

Posted on