Lubricating Film Thickness: Thin Film Lubrication
Transport Package: Plastic Bad + Cartone
Specification: RoHs
Lubricating Film Thickness: Thin Film Lubrication
Transport Package: Plastic Bad + Cartone
Specification: RoHs
This type of bushing is widely applied in hoisting machines and other construction machines, automobiles,tractors, trucks, machines tools and some mineral engines. It can be fabricated into bushes, half bearings, flanged bushes, thrust washers, spherical bearing and so on.
The bearings are wrapped from a cold formed homogeneous bronze (CuSn6.5P/CuSn8P) with exceptional material properties.
The standard sizes incorporate holes, which are dispersed in a special way over the whole bearing surface.
These holes serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction.
The material is suitable for construction and agricultural machinery etc. where high load and slow movement occur.
Tech. Data
Max. Load P Static load 120 N/mm²    Elongation 40%
Dynamic load 40 N/mm² Temp. -100 ºC~+200 ºC
Max. Speed (Lubrication) V 2.5 m/s Friction coefficient 0.08~0.25
Max.PV 2.8 N/mm²*m/s Thermal conductivity 58w(m*k)-1
Tensile strength 450 N/mm² Coef. of thermal expansion 18.5*10-6*K-1
Hardness HB 110-150
This type of bushing is widely applied in hoisting machines and other construction machines, automobiles,tractors, trucks, machines tools and some mineral engines. It can be fabricated into bushes, half bearings, flanged bushes, thrust washers, spherical bearing and so on.
The bearings are wrapped from a cold formed homogeneous bronze (CuSn6.5P/CuSn8P) with exceptional material properties.
The standard sizes incorporate holes, which are dispersed in a special way over the whole bearing surface.
These holes serve as lubricant reservoirs to rapidly build up a lubrication film at the start of movement and thereafter reduce the running friction.
The material is suitable for construction and agricultural machinery etc. where high load and slow movement occur.
Tech. Data
Max. Load P Static load 120 N/mm²    Elongation 40%
Dynamic load 40 N/mm² Temp. -100 ºC~+200 ºC
Max. Speed (Lubrication) V 2.5 m/s Friction coefficient 0.08~0.25
Max.PV 2.8 N/mm²*m/s Thermal conductivity 58w(m*k)-1
Tensile strength 450 N/mm² Coef. of thermal expansion 18.5*10-6*K-1
Hardness HB 110-150

Elevator Parts

Elevator Buttons,Elevator Switches,Roller For ElevatorElevator Spare Parts

Sanyou Elevators And Escalators Co., Ltd. , http://www.wxelevator.com

Posted on