Huaian Boshi Sports Products Co.,Ltd , https://www.bsdivingboots.com
With the rapid development of the domestic security industry, the pedestrian passage gates are gradually being widely used. The pedestrian passage gates are essential for their maintenance and maintenance during use, which directly affects the service life of the gates. Pedestrian passage gates should be regularly maintained. So, how to maintain the pedestrian passage gate products?
The maintenance and maintenance of the pedestrian passage gates must start from the following aspects:
First, the movement maintenance: the movement is the heart of the machine, must be maintained, it is recommended to maintain once a month.
1. Turn off the power, open the cover of the pedestrian access gate, clean the surface dust, often remove dust and debris from the surface of the cabinet, and keep the surface of the gate clean. The clean surface can give a good image and avoid the rust of the system.
2. Check if the fasteners and connecting rods are loose.
3, pay attention to the three-roller gate limit switch and limit film do not adjust casually, in case the adjustment is too far or too close to cause errors.
4. Check the wear of the wearing parts so that the solenoid valve can be lubricated when the left and right movements are reduced. Be careful not to add too much.
5. Check the balance spring after running 30,000 times, and make balance adjustment in time. The spring is easily deformed, and the time is long, and there may be changes, so pay attention.
6. The remote control distance is too short. Please check if the host installation position is covered by metal objects or if the battery power is sufficient.
7, the remote control battery uses DC12V, 23A battery, the service life of one year, pay attention to replace the battery, do not get wet, beat, hit.
Second, the pedestrian channel gate circuit power supply maintenance:
1. Turn off the power and clean the surface dust. Be careful not to wash with water to prevent short circuit.
2. Refer to the manual of the gate to check whether the parameters of each part are normal and whether there are aging electronic components. There are problems, to find the root of the problem, replace individual electronic components.
3. According to the previous usage, if there is any problem in the circuit part, if there is no problem, check whether the circuit, power supply, electric wire, and each plug are exposed or loose, bandage, finish, tighten the plug-in, check if there is any leakage, if the wire has Aging should be replaced.
Third, external cleaning and maintenance: pedestrian passage gates are generally made of 304 stainless steel, it is recommended to clean once a week.
1. Removal of rust spots on the pedestrian passage gate: It has been used for a long time, especially in outdoor use. Some rust spots may appear. To remove rust spots, sandpaper and talcum powder should be rubbed along the long grain road (protecting the thick grain direction). Otherwise it will affect the appearance.
2, the surface of the pedestrian channel gate cleaning: use a soft cloth to clean the surface dust, use a soft cloth and talcum powder to polish the exterior of the chassis, conditional can be coated with anti-rust oil, just apply the anti-rust oil do not rub with your hands After 3-5 hours of natural drying, it can be touched by hand, otherwise it will destroy the surface rust prevention effect.
3. If it is a painted or painted cabinet, wipe off the dust with a soft cloth. If there is any scratch on the surface, use the same color paint to make up, but be careful not to put the wing gate, swing gate, and speed gate to the infrared pair. Part of the eye is painted, otherwise the gate will falsely alarm, causing unnecessary trouble.